Water Treatment Before & After Photos

A Windham, Maine homeowner contacted Maine Radon & Water Treatment to address issues with their well water. The 3.5-year-old well exhibited two common signs of well water problems: a rotten egg odor and surface staining.

To determine the most effective course of action, we began with a comprehensive water quality test. This analysis played a vital role in crafting a solution to target the specific problems identified.

Combating Common Well Water Issues

Based on the test results, we recommended and installed the Filter 2.5CF Impression Plus Meter Aeration Unit with Centaur Carbon. This system is specifically designed to tackle sulfur and iron, two frequent culprits in well water woes.

Here's how the Impression Plus system works:

• Air Injection Technology: The system uses air injection to oxidize the sulfur and iron present in the water. Oxidation essentially converts these contaminants into a solid form.
• Filtration Power: Once oxidized, the iron and sulfur become filterable precipitates. The system's filtration process effectively removes these unwanted elements, leaving clean water behind.
• Eco-Friendly Approach: A significant advantage of the Impression Plus system is its reliance on air injection. This method eliminates the need for harsh chemicals, making it an environmentally friendly solution.

The Reward: Clean and Fresh Water

The installation of the Impression Plus system successfully addressed the homeowner's concerns. They can now enjoy fresh, clean, and odor-free water straight from the tap. This solution not only eliminates the unpleasant odor but also prevents staining on surfaces like sinks and bathtubs.

A homeowner in Oxford, Maine, contacted Maine Radon & Water Treatment for assistance with improving their indoor water quality. We began by conducting water quality tests to identify the best solution.

We then cleaned and serviced the existing water treatment system. A rebuild kit was also used to enhance the system's performance. The tests showed signs of high mineral content in the water, which is affecting the system. We found debris in the tank, indicating it would need draining and cleaning during the next maintenance visit.

In addition, we replaced the leaking pressure switch to ensure smooth operation. The system is now running at a flow rate of 6.9 gallons per minute and is functioning well.

A client in Gray, Maine called initially inquiring about Radon Mitigation and also asked about other services. Conducting on-site water testing, we presented treatment options. The client was present and ecstatic with the installation. We installed E99 Radon Water System and also installed Manganese/Iron Dual Stage Filter that the client supplied. Post-installation, our client was delighted to once again enjoy clear and safe drinking water.

Maine Radon & Environmental was hired for this install. This install included a water-right softener followed by a 20" 25/1 micron sediment filter. Followed by a whole house arsenic filtration. We re plumbed all connections and created a custom bypass. Another happy Client.

A Lewiston, Maine resident in need of water treatment services reached out to Maine Radon & Water Treatment due to concerns about water quality. After conducting water testing, we installed Premier aXis Arsenic 7 GPM 1CF Single Tank EP07 which safely, efficiently, and reliably reduces arsenic levels in the water. We also installed the sediment filter and water softener. The problem was effectively resolved, and the client expressed satisfaction with the water treatment.